Wholesale Custom PE Bags and Polybags
Pebag Factory manufactures made-to-order PE packaging in five product groups: flat bags, zip lock bags, PE self-adhesive bags, gusset bags, and PE film or roll stock. We can quote virgin LDPE, HDPE or LLDPE options after reviewing the bag construction, finished dimensions, thickness definition, quantity, artwork, packing and delivery term.
Leer esta pΓ‘gina en espaΓ±ol β
Prepare a Comparable PE Bag Quote
Use the same written specification for every supplier and quantity scenario. Price and schedule are confirmed only in the resulting quotation.
| Category | Construction Choices | Confirm for Quote | Commercial Output |
|---|---|---|---|
| Flat Bag (PE / PO / CPE sub-types) |
Open top; bottom or side seal | Finished width Γ length; thickness definition; material; print | Unit basis, MOQ, packing and schedule |
| Zip Lock Bag Reclosable zipper |
Zipper profile; opening direction; seal layout | Inside dimensions; wall thickness; closure test; quantity | Tooling, sample path and production assumptions |
| PE Self-Adhesive Bag Peel & seal or folding flap |
Adhesive strip or non-adhesive fold-over flap | Flap, liner and adhesive requirement; use condition | Material, closure and acceptance assumptions |
| Gusset Bag Side or bottom gusset |
Side or bottom gusset; seal position | Finished dimensions and gusset convention; load test | Construction, packing and inspection assumptions |
| PE Film & Roll Stock | Hand, machine or converting application | Width, thickness, roll length or weight, core and unwind | Quote unit, roll packing and tolerance assumptions |
β οΈ Public prices cannot represent a made-to-order bag. Your written quotation should state the exact specification, price unit, quantity basis, tooling or setup terms, packing, Incoterm, validity period and schedule assumptions.
* Ask for multiple quantity scenarios against the same specification; otherwise the unit prices are not directly comparable.
* Printing method, proofing route and plate or cylinder terms are confirmed after final artwork review.
π Order Information
PE Bag Specifications
Use these fields to define the requirement. Final manufacturability is confirmed against the complete specification and current production capability.
General Specifications
| Material | Virgin LDPE / HDPE / LLDPE options; final grade and formulation confirmed per order |
| Dimensions | State finished width, length and gusset convention; production range confirmed after review |
| Thickness | State nominal thickness, per-wall or total definition, tolerance and test method |
| Color | Provide the target color reference and acceptable comparison conditions |
| Printing | Provide final artwork, colors, print faces, coverage, proof and acceptance requirements |
| Sealing Type | Bottom, side, zipper, adhesive or other construction reviewed against intended use |
| Packing | Pieces per inner pack and carton, labels, pallet needs and any retail-ready requirement |
| Destination Documents | List required material and finished-product documents; raw-material certificates do not prove finished-bag compliance |
π PE Flat Bag
- Open-top construction with bottom or side seal
- Virgin PE options; PO or CPE sub-type feasibility reviewed separately
- Confirm finished dimensions, wall-thickness definition, seal position and load
- Printing route confirmed after final artwork and acceptance review
π Zip Lock Bag
- Press-to-close zipper construction for repeated opening and closing
- Confirm zipper profile, inside dimensions and opening direction
- Seal and closure performance must be defined by the intended contents and agreed test
- Clear or printed options reviewed against the final specification
π¬ PE Self-Adhesive Bag
- Peel & seal uses a release liner and adhesive strip; a fold-over flap has no adhesive
- Confirm flap length, liner, adhesive requirement and use conditions
- Repeated-opening expectations and closure acceptance must be written into the specification
- Finished dimensions and material are reviewed with the selected closure
π Gusset Bag
- Side or bottom gusset construction expands when filled
- Folds flat when empty for efficient storage and shipping
- Confirm the gusset measurement convention, filled shape, load and seal position
- Material and thickness are selected against the packed product and agreed test
π Film & Roll Stock
- Virgin PE film supplied in roll form for hand, machine or converting applications
- Confirm width, thickness, roll length or weight, core, winding direction and tolerance
- Printing feasibility is reviewed after final artwork and converting requirements
- Quote unit and roll packing are stated in the written quotation
PE Bag Material Comparison
Understand the difference between LDPE, HDPE, and LLDPE to choose the right material.
| Property | LDPE | HDPE | LLDPE |
|---|---|---|---|
| Clarity / Transparency | β High (clear) | ββ Low (translucent) | β Medium (hazy) |
| Tensile Strength | ββ Medium | ββββ High | βββ High |
| Puncture Resistance | ββ Medium | β Low | ββββ Excellent |
| Flexibility | ββββ Excellent | β Low (crispy) | ββββ Excellent |
| Softness / Feel | ββββ Soft | β Crunchy | βββ Medium-soft |
| Heat Sealability | ββββ Excellent | ββ Good | ββββ Excellent |
| Common Starting Point | Clarity and softer feel | Stiffer, thinner-gauge constructions | Flexibility and puncture-resistance discussions |
| Purchasing Check | Confirm the exact grade, formulation, thickness, finished-bag test and destination requirements before selection. | ||
Not sure which material you need? Send the packed product, dimensions, load, use conditions and required tests so the material options can be reviewed. Request a specification review β
PE Bags Application Scenarios
Use these application examples to describe the packed product and operating conditions. Final suitability depends on the agreed bag specification.
Food & Bakery
PE packaging can be reviewed for bread, snacks, frozen items or ingredients. Food-contact suitability and documents must be confirmed for the finished bag and destination market.
Get Quote for Food Packaging βGarment & Textiles
Clear PE flat bags for apparel packaging. Big sizes available (up to 120cm). Hang bag options.
Quote for Garment Bags βE-Commerce
Custom-printed poly mailer bags and product packaging for online sellers. Brand your shipments.
E-Commerce Quote βHardware & Industrial
Heavy-duty PE bags for parts, fasteners, tools and industrial components. Thicker gauge available.
Quote for Industrial Bags βRetail & Supermarket
CPE shopping bags, T-shirt bags, produce bags with custom logo printing. High clarity.
Quote for Retail Bags βAgriculture
Nursery bags, fruit protection bags, greenhouse film. UV-resistant options available.
Quote for Agriculture βHow to Order Custom PE Bags
From specification to delivery β 5 simple steps
Send Requirements
Size, thickness, quantity, print design, packaging preference
Get Quote & Sample
Receive written quote assumptions and confirm the appropriate sample path
Approve Terms
Approve specification, artwork, commercial terms and sample status in writing
Production
Production schedule and agreed inspection points follow the approved order
Shipping
Confirm packing, Incoterm, freight quote, shipping documents and handover
What a Comparable Quote Should Confirm
A lower number is not a comparable offer if material, thickness definition, print coverage, packing or delivery responsibility changed. Freeze the specification first, then compare the written assumptions.
How Do I Choose Custom PE Bags for My Product?
PE bags are plastic packaging bags made from polyethylene. They can be soft, durable, clear and cost-efficient, but the final material, size, thickness, printing and packing plan should be confirmed against the written specification.
Material Types
- LDPE: soft and clear, often reviewed for apparel and lightweight products.
- HDPE: stiffer and abrasion-resistant, often reviewed for hardware, food-related and industrial products.
- LLDPE: tough and tear-resistant, often reviewed for logistics, e-commerce and electronics packaging.
Thickness and Size Examples
Common discussion ranges can include 0.03-0.05 mm for lightweight products and inner packaging, 0.05 mm for some apparel packaging discussions, 0.06-0.08 mm for many e-commerce applications and 0.08-0.12 mm for heavier products. These are examples for specification review, not universal industry standards or capability promises; the final thickness is confirmed against product weight, handling and transport conditions.
Example sizes include 20 x 30 cm, 25 x 35 cm, 30 x 40 cm, 10 x 15 cm and 15 x 20 cm. Custom dimensions can be reviewed when the buyer provides the product size, closure needs, packing method, tolerances and presentation requirements.
Applications and Options
PE bags may be reviewed for apparel, electronics, hardware, food-related projects, e-commerce inner packaging, retail display, warehouse classification and product protection. Depending on the specification, options may include anti-fog treatment, anti-static treatment, dust protection, colour printing, matte or gloss appearance, a hanging hole, tear notch, closure strip, label area and additional thickness.
For food-related use, provide the intended contact scenario and destination market in the RFQ. Material and document suitability must be reviewed for the specific project before any food-contact or certification claim is made.
B2B Specification Comparison Table
| Material | Thickness Range | Printing Options | Sealing Type | Application |
|---|---|---|---|---|
| LDPE | Commonly discussed from 0.03-0.10 mm, confirmed per product and tolerance. | Flexographic or gravure printing reviewed from artwork, colour count and coverage. | Bottom seal, side seal, wicket/header or self-adhesive closure by construction. | Garment packaging, retail display, lightweight product protection and inner bags. |
| HDPE | Commonly discussed from 0.02-0.08 mm when stiffness and lower haze are acceptable. | Spot colour and simple logo printing reviewed after surface and ink requirements. | Side seal, bottom seal or die-cut handle construction depending on bag style. | Hardware, industrial packing, retail merchandise and food-related projects for review. |
| LLDPE | Commonly discussed from 0.04-0.12 mm for stronger tear and puncture resistance. | Printing reviewed together with film formulation, corona treatment and acceptance tests. | Heat seal, reinforced side seal, gusseted structure or roll-stock conversion. | E-commerce inner packaging, electronics, logistics, heavier products and film rolls. |
Use the table as a quotation checklist, not as a universal promise. Final material, thickness, printing route and sealing method are confirmed after product size, packing method, artwork, tolerance and transport conditions are reviewed.
Production Flow
- Film extrusion according to the approved material specification.
- Bag cutting.
- Heat sealing.
- Quality inspection against the written acceptance criteria.
- Packing and shipment planning.
Procurement Checklist
- Product use, dimensions, thickness basis and expected handling weight.
- Whether a logo, colour count, flexographic or gravure printing route is required.
- Whether a hanging hole, tear notch, closure strip, label area, matte or gloss finish is required.
- Whether anti-static, anti-fog, dust protection or food-contact review is required.
- Destination, packing method, requested Incoterm and any market-specific document requirements.
PE Bag FAQ
- What is the MOQ for custom PE bags?
- MOQ is confirmed by the complete specification, including material, size, thickness, construction, printing and packing. Trial orders are reviewed per specification, and samples are charged at cost with the sample charge credited against the first production order.
- What is the lead time for PE bags?
- The production schedule is confirmed after the specification, artwork, quantity and packing plan are reviewed. No universal lead-time promise applies to every PE bag project.
- Can PE bags be used for food-related packaging?
- Food-related use can be reviewed when the buyer provides the intended contact scenario and destination market. Material and supporting documents must be confirmed for the specific project before any claim is made.
- Can PE bags be printed?
- Yes. Flexographic and gravure printing can be reviewed according to the artwork, colour count, print area and order requirements.
- Can you make thicker PE bags?
- Thickness is reviewed against the product, handling and production specification. The suitable range and tolerance are confirmed in writing for each project rather than promised as a universal maximum.
Related Resources
Flat Bags Β· Gusset Bags Β· Film & Roll Stock Β· FAQ Β· PE Bag Material Knowledge Base Β· PE θ’ζζη₯θ―εΊ
Frequently Asked Questions
Everything you need to know about ordering PE bags from China.
A PE bag is a plastic bag made from polyethylene, a lightweight, flexible, and moisture-resistant material. PE bags are the most common type of plastic packaging β used for retail, food, apparel, electronics, and industrial applications. They come in many forms including flat bags, zip lock bags, self-adhesive bags, and gusset bags, and can be custom-printed with your logo.
MOQ is confirmed by specification β bag size, thickness, material and printing all affect the minimum lot. We regularly support first trial orders for new buyers; share your specification and we will confirm the feasible quantity.
The payment channel, timing and any deposit or balance schedule are stated in the user-approved written quotation. The website does not create a payment commitment.
Packing is defined in the written specification: pieces per inner pack and carton, labels, pallet requirements and any retail-ready packing. Cost and suitability are confirmed in the quotation rather than assumed to be included.
Custom width, length, gusset and thickness can be reviewed against the bag construction, material and current production capability. State whether thickness is per wall or total thickness and include the required tolerance.
Thickness cannot be selected from product weight alone. Consider dimensions, shape, edges, load, handling, closure, material and use conditions, then define an agreed sample or finished-bag test before production.
Printing feasibility is reviewed after receiving final artwork, colors, print faces, coverage and acceptance requirements. The production method, proofing route and plate or cylinder terms are then confirmed in writing.
The requested Incoterm defines which costs and responsibilities belong to each party. We confirm the named place, packed shipment details, responsibility split and current freight quote before including an Incoterm in the commercial offer.
Sample availability, type, representativeness, charges, courier cost and timing are confirmed for each project. A stock sample may not represent the final dimensions, material, printing or production lot.
The custom production cycle is confirmed after the specification, quantity, artwork, sample status and current production plan are reviewed. Shipping timing is quoted separately for the destination and agreed Incoterm.
List the product, material, destination market and exact documents required. We then verify what can be provided for that order. A raw-material certificate is supporting evidence and does not by itself prove finished-bag food-contact, FDA, PPWR or other market compliance.
Measure the finished bag width and height, then state whether dimensions include zipper, flap, header, gusset or sealing allowance. For accurate comparison, also confirm whether thickness is measured per wall or as total thickness.
Approve the sample type that matches the risk of the order: material sample, printed proof, pre-production sample or finished-bag sample. Samples are charged at cost and the sample charge is credited against the first production order.
Provide pieces per inner pack, carton quantity, carton marking, pallet requirements, destination and requested Incoterm. Packed weight and volume are confirmed after the packing method is fixed, then freight can be quoted separately.
PE Bag Buying Guides
Use these guides to prepare the specifications before requesting a factory quote.
Choose the Right Material
Compare LDPE, HDPE, LLDPE, PO and CPE for clarity, strength and applications.
Read the material guide βSize and Thickness
Confirm bag dimensions, microns and the information needed for an accurate quote.
Read the size guide β Β· Thickness guideStart with a Smaller Order
Understand MOQ, trial orders, setup costs and the practical steps for first-time importers.
Read the small-batch guide βReady to Order PE Bags?
Send the bag construction, dimensions, thickness definition, material, quantity, artwork, packing and destination. We will review feasibility and prepare a written quotation.
π© Request a Quote βSample type, charges, courier cost and timing are confirmed separately for each project.